Why does the computer not see the phone in firmware mode?

Often there are situations when it is necessary to transfer information from one source to another. For example, send some photos from your phone to your computer. But, it also happens when, many are faced with such a problem when the computer does not see the phone for firmware.

Situations when the laptop does not see the phone in firmware mode

Experts identify a number of reasons, or rather software and hardware failures, due to which the computer does not see the phone in firmware mode, in particular, we are talking about:

Experts also recommend paying attention to the following points:

• software problems. In this case, the computer will not display the information that is contained on the mobile. But, despite this device, it will charge normally;
• physical malfunction. In such situations, charging will not work.

As a rule, the main problem that the computer does not see the phone for firmware is the lack of a special driver, in this case you need to download and install it. But, even if this does not help, then you should:

Regarding the problem, when the computer does not see the phone, but charging is in progress, then this may indicate breakdowns in the mobile itself.

Watch the video on what to do if the PC does not see the phone for subsequent firmware.

Why does the laptop not see the phone via usb, and what should I do?

If you know for sure that the cause of such a problem is exactly in the mobile phone, then you can follow these steps:

And also, experts say that you can reset the device’s OS settings, but keep in mind that a lot of information can also be affected.

Keep in mind that all of the above steps must be performed in order. After each of these actions, be sure to check if the problem was resolved. If everything remains the same, then feel free to try further. If you are suddenly faced with the fact that the laptop does not see the bluetooth phone, then before contacting the repairmen, try to cope with such a problem on your own and only in extreme cases go to service centers.

What to do if the computer is the culprit of such a failure?

If you are sure that the computer is malfunctioning, and it is as a result of a breakdown on it that the computer eventually does not see the phone without a flash drive, then, in this case, experts recommend performing the following steps:

Failure in the physical interface

Experts strongly discourage the use of faulty interfaces, even if the gadget is still charging. Do not forget that you can transfer information wirelessly or use the services of cloud services that can be used on both devices. So, it is cloud services that are most convenient to use to transfer photo and video files.

And if you want to control your mobile from a computer, you can, as an option, install MyPhoneExplorer on it. This application consists of two interconnected parts – for the phone and for the PC. By the way, such applications do not require additional installation of drivers.